Find Out the Complex Roof Replacement Cost Factors

Roof Replacement Cost is the sum of all the expenses, such as labor, material and other expenditures associated with the replacement of a roof. Roof Replacement Cost can be calculated based on the number of years it takes to fully replace an asphalt shingled roof. Roof Replacement Cost also can be calculated based on the material used to manufacture the roof. The costs of the different materials vary depending on the quality and amount of the initial investment. The longer the roof has been installed, the more expensive it becomes. This is the reason why most homeowners who have an asphalt shingled roof often opt for replacement after five to ten years of service.

Wood or Metal Roofs: Roof Replacement Cost for this kind of roofing varies according to the quality and amount of the initial investment. The average price to replace a wooden roof is approximately $7,500 to approximately $10,500 for a metal roof. For a metal roof, generally the cost to replace it is approximately $5,500 to approximately $7,500 for a wooden roof. In case of metal roofs, they are generally available in a few different styles, so it might be necessary to choose one based on your preference. If your roof replacement costs are less than your annual income, then it would be advisable to change the type of roofing materials to avoid being charged extra for things like repairing or replacing roofs.

Flat Roof Replacement Cost depends on the amount of square foot house measured and the number of tiles that are used in the construction of the home. Therefore, for a two story home having twenty-one square feet of floor area, then the roof replacement cost would be approximately fifty dollars per square foot. On the other hand, for a one-story house having thirty-eight square feet of floor area, then the roof replacement cost would be approximately sixty-five dollars per square foot. For a one story home with forty-eight square feet of floor area, then the roof replacement cost would be approximately eighty dollars per square foot.

Asphalt Shingle Roof Replacement Cost: Roof replacement cost for asphalt shingles is also dependent on the amount of initial investment required and on the number of tiles used. Asphalt shingles are generally available in various styles, colors and sizes. Cost for asphalt shingles also depends on the maintenance required and on the extent to which they can be re-painted. If you want to reduce the roof replacement cost, then it would be a good idea to use only asphalt shingles. However, if you are looking to increase the resale value of your property and if you want to give a tough look to your home, then you will have to go for other roofing materials like slate, clay or tiles.

Underlayment: Another important factor that plays an important role in deciding the roof replacement costs is the kind of underlayment used. The different materials of underlayment have their own advantages and disadvantages. For instance, fiberglass is very light in weight and its strength is almost equal to that of wooden shakes. If you are going to use fiberglass shake, then the cost of replacing the entire roof will be very less as compared to using other materials. On the other hand, wood underlayment provides a very sturdy support to your shingles which increases their life period by several years.

Roof Installation Labor Costs: Installing slate roofs may cost a lot because the density of slate is higher than that of other materials. At the same time, the labor cost factors are more for slate roofs as compared to other roofing types. However, it would not be correct to say that slate is less labor intensive than other roofing types. The right choice of contractor will help you bring down the roof installation labor costs. It is always better to get estimates from a number of contractors and compare them to find out the best option available for you.

Leave a Reply

Your email address will not be published. Required fields are marked *